1. Remove Florboardz tiles from packaging. Set ramps and corners aside.

2. Referencing the image supplied in the package, layout all Florboardz on the ground to match the image accordingly, placing the loop edges in the 3 o’clock & 6 o’clock positions.

3. Working from left to right, row by row, press the pegs into the loops. Press firmly until you hear a snap. It’s okay to step on Florboardz to ensure that they are locked in.

4. Now assemble ramps. For the left and top edge of the unit, attach the loop edge ramps in a row, then snap rows to appropriate edges. For the right and bottom edge of the unit, attach the peg edge ramps in a row, then snap rows to appropriate edges. You may need to press firmly from above and below until they snap into place.

5. Attach corners by connecting and snapping the pegs and loops on each side.

Teardown
Working from left to right, detach corners and ramps by pushing them downward. Then, continue to disconnect the tiles throughout the unit (careful not to damage loops and pegs). Break down the remaining tiles by folding the bottom sides inward until tiles disconnect.